The problem is that every time I have to lift the plywood to access the storage underneath I have to unscrew the rod and then red crew it when I set it back down. This was too much work.
Here is the green thermorest mattress pad under my sleeping bag.
Now a picture with plywood lifted exposing my clothing bags. The bags are pillow case bags that are waterproof. These bags conform to the space available.
The change I made was to take out the recessed nut in the plywood that the threaded end of the wooden rod goes into.
This allows me to just lift the plywood to access the area underneath. When I put it back I just hold the wooden rod as I lower the plywood and insert the rod in the leftover hole, not having to screw it in. This is much simpler.
Brent
macaloney@hotmail.com
No comments:
Post a Comment